Weight-rated core hole covers
for safety and water mitigation

A Costly Problem Needs an Innovative Solution

Uncovered (or inadequately covered) core holes allow rain water to cascade throughout the building.  This nuisance creates unsafe conditions, damages materials and slows progress on the job.  Eventually, trapped water must be pumped out – an expensive and time-consuming process.     

Trades know that the safer, cleaner, and more organized the job site is, the better the project goes for all.  The Hole Solution is ready and able to do its part by keeping the slabs dry and the crews safe.

Innovative Design & Exacting Specifications

9

Optimizes material usage

9

Minimizes tripping hazards

9

Distributes structural capacity evenly, regardless of the diameter

9

Allows holes as small as 2 inches apart to be covered

9

Uses post-consumer recycled polypropylene that can be recycled

9

water seal made of polyethylene ‘closed cell foam’, to keep the water out

Sizes

• Standard sizes: 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 7.0, 8.0, and 9.0 inches in diameter Unit also fits metric equivalent of the English sizes listed

• Custom sizes are also available

Loads

• Safety factor >4 for a 150 psf load.

• Safety factor >2 for a 250 pound load at the center.

Temperature Range

•  -20º Fahrenheit to 120º Fahrenheit

Color

Fluorescent yellow

Installation

No tools needed! Simply press it into hole until underside of rim is flush with floor.

Removal

Pry up with screwdriver (or similar tool) using the two slots on the underside of rim.

Make Your Team’s Safety a Priority

Your team’s safety is our priority! Eliminate costly slips and trips with The Hole Solution.

Slips, trips and falls on level surfaces account for 12% of total workers compensation claims.  The Hole Solution is specifically designed to help workers avoid unnecessary injury.  Its unique domed profile provides a superior alternative to plywood by eliminating the “trip edge”. The individual unit size installs quickly, and stays firmly in place- no more going back to recover holes. 

OSHA requires covers on cored holes in construction. On many job sites, this requirement is met by covering the hole with a piece of plywood – an unsafe, inadequate and unreliable solution.

Cover Your Projects with The Hole Solution

9

Provides a cleaner, neater, safer way to plug holes saves time and money with quick installation

9

Prevents water from passing through floors

9

Protects on-site workers from a tripping hazard

9

Fits securely and stays solidly in place 

9

Minimizes tripping hazards

9

Distributes structural capacity evenly, regardless of the diameter

9

Allows holes as close as 2 inches apart to be covered

9

Fits securely and stays solidly in place

9

Optimizes material usage